Home 9592

3C2A2594
3C2A2603
3C2A2614
3C2A2618
3C2A2626
3C2A2631
3C2A2633
3C2A2637
3C2A2639
3C2A2645
3C2A2649
3C2A2653
3C2A2658
3C2A2660
3C2A2666
3C2A2671
3C2A2672
3C2A2679
3C2A2680
3C2A2697
3C2A2701
3C2A2703
3C2A2709
3C2A2712
3C2A2729
3C2A2741
3C2A2746
3C2A2751
3C2A2753
3C2A2755
3C2A2756
3C2A2757
3C2A2766
3C2A2772
3C2A2782
3C2A2787
3C2A2793
3C2A2801
3C2A2803
3C2A2808
3C2A2828
3C2A2843
3C2A2848
3C2A2882
3C2A2885
3C2A2890
3C2A2891
3C2A2894
3C2A2896
3C2A2903
3C2A2904
3C2A2910
3C2A2911
3C2A2913
3C2A2914
3C2A2918
3C2A2936
3C2A2942
3C2A2981
3C2A2984
3C2A2988
3C2A3004
IMG 5846
IMG 5847
3C2A3010
3C2A3014
3C2A3017
3C2A3021
3C2A3025
3C2A3036
3C2A3037
3C2A3050
3C2A3064
3C2A3070
3C2A3080
3C2A3081
3C2A3092
3C2A3093
3C2A3102
3C2A3109
3C2A3127
3C2A3159
3C2A3176
3C2A3181
3C2A3186
3C2A3187
3C2A3201
3C2A3203
3C2A3217
3C2A3242
3C2A3244
3C2A3248
3C2A3279
3C2A3283
3C2A3284
3C2A3289
3C2A3297
3C2A3314
3C2A3325
IMG 5866
3C2A3334
3C2A3337
3C2A3338
3C2A3361
3C2A3372
3C2A3376
3C2A3388
3C2A3389
3C2A3415
3C2A3420
3C2A3427
3C2A3431
3C2A3439
3C2A3440
3C2A3443
3C2A3469
3C2A3479
3C2A3501
3C2A3518
3C2A3519
3C2A3520
3C2A3538
3C2A3576
3C2A3578
3C2A3580
3C2A3583
3C2A3602
3C2A3607
3C2A3611
3C2A3613
3C2A3621
3C2A3622
3C2A3629
3C2A3630
3C2A3632
3C2A3637
3C2A3645
3C2A3672
3C2A3677
3C2A3679
3C2A3693
3C2A3696
3C2A3703
3C2A3704
3C2A3721
3C2A3722
3C2A3725
3C2A3726
3C2A3729
3C2A3740
3C2A3743
3C2A3766
3C2A3786
3C2A3790
3C2A3794
3C2A3857
3C2A3929
3C2A4009
3C2A4011
3C2A4014
3C2A4015
3C2A4016
3C2A4025
3C2A4051
3C2A4052
3C2A4054
3C2A4058
3C2A4081
3C2A4086
3C2A4088
3C2A4090
3C2A4091
3C2A4095
3C2A4097
3C2A4107
3C2A4110
3C2A4111
3C2A4112
3C2A4118
3C2A4125
3C2A4130
3C2A4132
3C2A4135
3C2A4137
3C2A4142
3C2A4144
3C2A4154
3C2A4164
3C2A4305
3C2A4307
3C2A4314
3C2A4317
3C2A4322
3C2A4323
3C2A4324
3C2A4590
3C2A4663
3C2A4771
3C2A4821
3C2A4856
41176958-EFF3-49C6-8004-A401AC0F95F8
IMG 5872
3C2A4857
3C2A4863
3C2A4865
3C2A4866
3C2A4869
3C2A4871
Merlin's Cave
3C2A4876
3C2A4877
3C2A4887
3C2A4889
3C2A4893
3C2A4900
3C2A4903
3C2A4904
3C2A4906
3C2A4912
3C2A4919
3C2A4920
3C2A4929
3C2A4969
3C2A4971
3C2A4973
IMG 5876
3C2A4974
3C2A4975
3C2A4976
3C2A4978
3C2A4991
3C2A4992
3C2A4995
3C2A5001
3C2A5006
3C2A5007
3C2A5008
3C2A5021
3C2A5023
3C2A5026
3C2A5030
3C2A5036
3C2A5040
3C2A5050
3C2A5076
3C2A5086
3C2A5106
3C2A5108
3C2A5118
3C2A5123
3C2A5179
3C2A5183
3C2A5193
3C2A5202
3C2A5209
Stockton STEM Badge boards
The badge printed circuit board (PCB) comes in several colors.
Stockton STEM Badge components
The badge consists of a handful of electronic components. Components R1, R5 and J1 are not normally populated.
Stockton STEM Badge microcontroller
The chip is an inexpensive "PIC" microcontroller; this runs a program that controls the LEDs.
Stockton STEM Badge resistors
These are 47 ohm resistors; they limit the current supplied to the orange, yellow and green LEDs. The blue LED does not require one.
Stockton STEM Badge capacitors
The capacitors smooth the power on the badge. The top capacitor, is not polarity sensitive; that is, it can be used either way round. The other capacitor must be used only the correct way round; the case has a "-" symbol printed on it.
Stockton STEM Badge LEDs and button
Orange and yellow LEDS. The pushbutton switch allows a person to control the badge.
Stockton STEM Badge LEDs
Green and blue LEDs
Stockton STEM Badge LEDs
Notice how the LEDs typically have one leg longer than the other; this is called the "anode". The colored case also has one flat side, opposite the longer leg; the leg on this side is called the "cathode". Also, note the distinctive shape of what is inside the colored case; this can also be used to help determine its orientation. The gap at the top of the metal surface is always on the anode side. LEDs can only be used the right way round so determining orientation is important.
Stockton STEM Badge LEDs
Stockton STEM Badge LEDs
Stockton STEM Badge components
Stockton STEM Badge IC and socket
The chip, an integrated circuit, or IC, must also be used the correct way round. Both the chip and its socket have a notch at one end to identify its orientation.
Stockton STEM Badge IC and socket
The legs of the chip need to be straight otherwise they will not properly insert into their positions in the socket. It is easy to bend or break the legs if care is not taken.
Stockton STEM Badge resistor legs
The resistor legs need to be bent in order to insert them into the board.
Stockton STEM Badge resistor legs
The legs are passed through the board holes; they may need pulling firmly, but not too firmly, with pliers to pull the resistor body flush with the board.
Stockton STEM Badge resistor legs
The legs are then carefully bent to about 45 degrees to hold the resistor in place for soldering.
Stockton STEM Badge resistor legs
Soldered legs; only a small amount of solder is needed and it heat should be applied only briefly.
Stockton STEM Badge resistor legs
The legs are trimmed, the excess removed with side-cutters.
Stockton STEM Badge decoupling capacitor
This ceramic capacitor is not orientation sensitive. Decoupling means it absorbs electrical noise and is used to filter the power feeding the microcontroller.
Stockton STEM Badge decoupling capacitor
The capacitor should sit flush with the board.
Stockton STEM Badge decoupling capacitor
As with the resistors, the legs should be splayed a little to help hold it in place for soldering.
Stockton STEM Badge IC socket
Note the orientation of the indent at the upper edge of the IC socket.
Stockton STEM Badge IC socket
The IC socket should lay flat against the board.
Stockton STEM Badge IC socket
Soldering one leg first and checking that the socket is flat against the board avoids a simple mistake. If it is not flat, or otherwise misaligned simply re-heating the leg will help correct the issue. Once orientation and alignment is verified, solder the remaining legs. Sometimes a small shim, such as the black foam here, can help keep the board level and simplifies the task.
Stockton STEM Badge IC socket
Soldered legs.
Stockton STEM Badge electrolytic capacitor
Electrolytic capacitors are polarity sensitive; note the "-" symbol on one side of the capacitor package. These capacitors typically have a larger capacity than their ceramic counterparts and are used for bulk storage; this one is used to assist the battery when the LEDs turn on. This is necessary because button cell batteries are not designed to provide as much power as the LEDs can demand.
Stockton STEM Badge electrolytic capacitor
Orientation of this capacitor is important. There is a "+" symbol in the footprint of the component printed on the board; the "-" of the capacitor should be on the opposite side.
Stockton STEM Badge button
The push-button switch will fit two ways. Orientation does not matter.
Stockton STEM Badge button
As with the IC socket, soldering one leg first and verifying component alignment will help prevent easy mistakes.
Stockton STEM Badge LEDs
LEDs have a flat edge on one side of their case.
Stockton STEM Badge LEDs
The footprint for the LEDs also shows a flat edge; orientation of the LEDs needs to match that of the board.
Stockton STEM Badge LEDs
While all components can be destroyed with an excess of heat during soldering, LEDs are especially susceptible to this.
Stockton STEM Badge LEDs
The case of an LED can crack if the legs are bent too close to it; even after placing the LED on the board, only bend the legs slightly to hold it in place.
Stockton STEM Badge LEDs
All the LEDs have been soldered. Notice that they all have the same orientation; the flat edge is to the left.
Stockton STEM Badge battery
The battery holder is a simple metal cage that solders to the underside of the board.
Stockton STEM Badge battery
Note the orientation of the holder; reversing it will make it difficult to insert the battery later.
Stockton STEM Badge battery
It is possible for the holder to become hot during soldering; be careful when handling immediately after soldering.
Stockton STEM Badge IC
The IC pins need to be straight and line up with their receptacles in the socket.
Stockton STEM Badge IC
When inserting the IC, firm but controlled pressure is needed to avoid bending the pins.
Stockton STEM Badge IC
Make sure the IC is correctly aligned before pushing it in.
Stockton STEM Badge IC
Once pushed all the way in, the IC may sit above the socket, but it will be parallel to it.
Stockton STEM Badge battery
The battery is a typical CR2032 button cell. Notice which side the "+" is on.
Stockton STEM Badge battery
Note the orientation of the battery. The "+" side contacts the battery holder.
Stockton STEM Badge battery
The battery should sit snugly under the holder.
Stockton STEM Badge completed
Press the button to start the lights!
P7220060
OLYMPUS DIGITAL CAMERA
P7220061
OLYMPUS DIGITAL CAMERA
P7220079
OLYMPUS DIGITAL CAMERA
P7220080
OLYMPUS DIGITAL CAMERA
P7220081
OLYMPUS DIGITAL CAMERA
P7220082
OLYMPUS DIGITAL CAMERA
P7220084
OLYMPUS DIGITAL CAMERA
P7220089
OLYMPUS DIGITAL CAMERA
P7220133
OLYMPUS DIGITAL CAMERA
P7220134
OLYMPUS DIGITAL CAMERA
P7220156
OLYMPUS DIGITAL CAMERA
P7220169
OLYMPUS DIGITAL CAMERA
P7220171
OLYMPUS DIGITAL CAMERA
P7220172
OLYMPUS DIGITAL CAMERA
P7220173
OLYMPUS DIGITAL CAMERA
P7220178
OLYMPUS DIGITAL CAMERA
P7220208
OLYMPUS DIGITAL CAMERA
P7230210
OLYMPUS DIGITAL CAMERA
P7230213
OLYMPUS DIGITAL CAMERA
P7230222
OLYMPUS DIGITAL CAMERA
P7230226
OLYMPUS DIGITAL CAMERA
P7230228
OLYMPUS DIGITAL CAMERA
3C2A5673
3C2A5677
3C2A5695
3C2A5702
3C2A5710
3C2A5718
3C2A5724
3C2A5725
3C2A5728
3C2A5735
3C2A5737
3C2A5739
3C2A5740
3C2A5741
3C2A5747
3C2A5748
3C2A5751
3C2A5752
3C2A5753
3C2A5754
3C2A5755
3C2A5756
3C2A5757
3C2A5760
Mercator's Atlas
3C2A5767
3C2A5768
3C2A5770
3C2A5771
3C2A5779
3C2A5787
3C2A5788
3C2A5790
3C2A5792
3C2A5794
3C2A5798
3C2A5821
3C2A5824
3C2A5825
3C2A5827
3C2A5831
3C2A5834
3C2A5835
3C2A5836
3C2A5837
3C2A5846
3C2A5847
3C2A5850
3C2A5856
3C2A5859
3C2A5876
3C2A5889
3C2A5906
3C2A5908
3C2A5909
3C2A5915
3C2A5918
3C2A5922
3C2A5926
3C2A5928
3C2A5930
3C2A5940
3C2A5947
3C2A5958
3C2A5965
3C2A5973
3C2A5974
3C2A5985
3C2A6015
3C2A6014
3C2A6018
3C2A6030
3C2A6036
3C2A6043
3C2A6046
3C2A6048
3C2A6056
3C2A6057
3C2A6058
3C2A6062
3C2A6065
3C2A6118
3C2A6133
3C2A6134
3C2A6136
3C2A6140
3C2A6170
3C2A6203
3C2A6241
3C2A6245
3C2A6248
3C2A6256
3C2A6277
3C2A6278
3C2A6287
3C2A6304
3C2A6309
3C2A6312
3C2A6317
3C2A6344
3C2A6348
3C2A6366
3C2A6378
3C2A6385
3C2A6408
3C2A6457
3C2A6464
3C2A6467
3C2A6468
3C2A6470
3C2A6471
3C2A6474
3C2A6477
3C2A6479
3C2A6483
3C2A6486
3C2A6491
3C2A6495
3C2A6496
3C2A6497
3C2A6499
3C2A6501
3C2A6502
3C2A6505
3C2A6510
3C2A6517
3C2A6525
3C2A6529
3C2A6530
3C2A6532
3C2A6533
3C2A6536
3C2A6538
3C2A6540
3C2A6547
3C2A6549
3C2A6550
3C2A6553
3C2A6554
3C2A6557
3C2A6558
3C2A6559
3C2A6560
3C2A6561
3C2A6563
3C2A6565
3C2A6577
3C2A6578
3C2A6587
3C2A6590
3C2A6591
3C2A6593
3C2A6600
3C2A6604
3C2A6606
3C2A6607
3C2A6610
3C2A6614
Mathematical Bridge
3C2A6623
3C2A6625
3C2A6627
3C2A6628
3C2A6629
3C2A6634
3C2A6635
3C2A6641
3C2A6642
3C2A6646
3C2A6648
3C2A6649
3C2A6651
3C2A6653
3C2A6662
3C2A6669
3C2A6680
3C2A6684
3C2A6698
Piper vs. Apollo
3C2A6714
3C2A6716
3C2A6717
3C2A6719
3C2A6735
3C2A6737
3C2A6745
3C2A6747
3C2A6751
3C2A6752
3C2A6754
3C2A6767
3C2A6769
3C2A6771
3C2A6775
3C2A6777
3C2A6785
3C2A6786
3C2A6791
3C2A6795
3C2A6797
3C2A6803
3C2A6806
3C2A6817
3C2A6818
3C2A6826
3C2A6848
3C2A6852
3C2A6853
3C2A6857
3C2A6861
3C2A6864
3C2A6907
3C2A6911
3C2A6916
3C2A6996
3C2A7016
3C2A7021
3C2A7024
3C2A7025
3C2A7026
3C2A7031
3C2A7034
3C2A7040
3C2A7080
3C2A7100
3C2A7119
3C2A7120
3C2A7141
3C2A7153
3C2A7158
3C2A7187
3C2A7197
3C2A7202
3C2A7218
3C2A7220
3C2A7224
3C2A7226
3C2A7232
3C2A7236
3C2A7237
3C2A7241
3C2A7242
3C2A7244
3C2A7248
3C2A7252
3C2A7259
3C2A7263
3C2A7272
3C2A7277
3C2A7283
3C2A7306
3C2A7326
3C2A7338
3C2A7342
3C2A7345
3C2A7351
3C2A7364
3C2A7365
3C2A7374
3C2A7385
3C2A7395
P7230240
3C2A6343
3C2A6371
Y-axle idler pulley
Testing the slide of the bed
Taking shape
Z-axis motor mounts
Z-axis motor mounts
X and Z axis
Hotend fan
Print head cables
Cables everywhere
Printhead rear
Printhead front
The cables have to go somewhere
First print in progress
Treefrog
Baby Groot