« 2002
2004 »
January
February
March
April
May
June
July
August
September
October
November
December
All
- 114 1493
- 114 1494
- 114 1492
- 114 1495
- 114 1491
- 151 5107
- 119 1937
- 114 1500
- 114 1486
- 114 1490
- 114 1499
- 119 1939
- 142 4227
- 151 5106
- 151 5108
- 115 1502
- 114 1487
- 103 0375
Jappert - 114 1488
- 114 1496
- 151 5104
- 103 0378
- 119 1933
- 142 4226
- 103 0377
- 114 1489
- 136 3607
- 119 1951
- 104 0410
- 103 0392
- 119 1964
- 103 0393
- 142 4228
- 103 0388
- 142 4256
- 103 0386
- 104 0418
- 103 0364
Trig pulls a new bird - 133 3303
Beastie so far - 119 1954
- 154 5468
- 103 0379
- 104 0416
- 103 0396
- 103 0389
- 103 0394
- 132 3292
Coming together nicely now Tail piece is in, various tail-plane bits and bobs. The tail rotor blades are on the wrong way round here (and remained so for a while) until I realised I had the belt on the wrong way. I noticied this long before firing up the engine, thankfully. - 103 0397
- 115 1503
- 125 2544
- 125 2543
- 142 4255
- 132 3280
Engine in the frame, closeup - DSC01322
Tunnel ahoy! 2003-03-29 At the rear of the layout, a long passenger train headed by two Class A3s enters what will be a tunnel. 2003-03-29 - 132 3294
Tail rotor The orange material you can see through the hole is the belt. The blades twist together, in opposite directions. This is how you point the helicopter. - IMG 0651
- 132 3295
Main drive wheel The belt goes back to the tail rotor. The grey spindle meshes with a drive wheel on the engine drive shaft. There is a shaft going up through these two wheels directly to the rotor hub. - 142 4251
- 106 0645
- 136 3608
- 103 0391
- 119 1952
- 104 0412
- IMG 0652
- 125 2539
- 103 0398
- 103 0395
- 106 0644
- 125 2540
- 104 0408
- 125 2546
- 104 0414
- DSC01319
Towards the industrial area 2003-03-29 Progress has occured in the industrial region with the addition of some storage tanks and a depot. 2003-03-29 - 125 2542
- 119 1963
- 106 0643
- 125 2547
- 900 0014
Merlin [3/6] - 900 0013
Merlin [2/6] - 125 2586 2
- 125 2585 2
- 103 0400
- 104 0417
- 136 3609
- 104 0409
- IMG 0670
- 125 2538
- 899 9944
Tara! - 154 5472
- 125 2587 2
- 142 4252
- 142 4254
- 115 1513
- 104 0411
- 129 2971
- 106 0646
- 104 0401
- 125 2545
- 133 3340
Outdoors [1/4] - 104 0406
- 104 0413
- 104 0404
- 106 0641
- 104 0419
- 133 3304
Clutch The silver drum in the centre of the picture is the clutch bell. Inside this is a clutch disc, which runs directly from the engine below it. It's designed to be fully diengaged below about 7000rpm and fully engaged above 10000rpm. The rotor blades operate at a fraction of this speed, not normalyl going faster than about 1700 rpm. - 132 3287
Rotor head and flybar The fly bar, I think, ,ostly balances the main blades. They are on a single bar whose pitch alters with the cyclic, but not the collective (I think, lots of "I think"'s here!). The bar is supposed to be near-perfectly balanced otherwise it causes really nasty vibrations in the rest of the machine. Rememeber, this thing is a huge spinning top, really. - 154 5459
- 125 2587
- 137 3753
Still in one piece Front view, it's been out flying a couple of times now - 132 3290
Tail rotor assembly This was a fiddly piece to put together. - 125 2555
- 104 0407
- 119 1960
- 154 5428
- 132 3279
Engine in the frame - 104 0415
- 154 5473
- 104 0405
- 154 5470
- 142 4253
- 136 3610
- 125 2567
- 137 3749
Fuel line arrangement This t-piece arrangement allows me to load/unload fuel to the tank without pulling the pipwork away from the engine. Just use the right fuel line clip to direct the flow to/from the tank. Similarly, the left clip allows me to inject after run oil without having to do fiddly stuff, or remove the engine. - 125 2541
- 103 0390
- 132 3291
Tail rotor assembly The red coloured pulley is a two-piece item, a flange fits on one end, and it can go two ways round. The correct way si with the shorter end into the pulley, longer end outwards. Otherwise, as I discovered, there is about 2 to 3mm play in the tail rotor shaft. Not good. - 104 0403
- DSC01317
A village station 2003-03-29 The village Railway Station, yet to be named or decorated. 2003-03-29 - 119 1959
- 154 5424
- IMG 0665
- 154 5467
- 132 3281
Engine in the frame, other side - 900 0012
Merlin [1/6] - DSC01323
The cottage in the village 2003-03-29 That lady is still waiting... 2003-03-29 - 154 5466
- 154 5430
- 154 5425
- 132 3285
Rotor head bearings At this point, I only assembled one end of this piece. The bearing set in the bag fit onto the shaft with a collection of washers, spacers, bolts, loctite and so on. It's all a bit busy. Particularly sicne I forgot to put in a supporting piece rigth in the centre to had to disassemble the thing. - 154 5427
- 154 5405
- 125 2586
- 154 5469
- 103 0399
- 154 5471
- 104 0402
- 154 5426
- 133 3305
Gyro This is described by many as the "most cost effective" stabilisation gyro on the market at present. It's job: keep the machine pointing in the direction you want it to. In the old days, you would program a "revolution mix" into your radio which altered the tail rotor blade pitch according to what you were doing with the throttle/collective, the idea being that you could match the rotational energy being put out by the main rotors to make the tail rotor counteract it, and keep the machine steady. Technology these days simply measures the rotation and does what it needs to counteract it. Funky. This is what makes the difference between whirly-top-with-dangerous-bits and simply "dangerous". - 132 3286
Look at the mess! - 129 2937
- 129 2968
- 154 5434
- 129 2903
- 119 1953
- b0030
Merlin [4/4] - 125 2553
- 900 0015
Merlin [4/6] - 136 3615
- 125 2570
- 119 1962
- IMG 0666
- IMG 0654
- 119 1967
- 119 1965
- IMG 0668
- IMG 0673
- IMG 0649
- 136 3620
- 132 3288
Flybar again - 129 2965
- 125 2585
- 129 2936
- 126 2611
- 125 2554
- 136 3618
- 129 2948
- 126 2613
- 154 5422
- 154 5433
- 125 2569
- 115 1511
- 129 2901
- 125 2537
- IMG 0675
- 129 2949
- 136 3622
- 129 2964
- 129 2963
- 154 5432
- 129 2974
- 154 5431
- 136 3621
- 119 1966
- 154 5429
- 132 3283
Assembling the rotor head These bits will eventually sit atop the swash plate. - 129 2904
- 126 2610
- 129 2973
- 119 1961
- 154 5443
- 129 2946
- 136 3623
- 119 1956
- 100 0033
Merlin [3/5] - 129 2966
- IMG 0672
- 142 4230
- 900 0016
Merlin [5/6] - 154 5462
- 900 0009
Merlin! - 123 2335
- 129 2902
- 126 2682
- 142 4250
- 133 3330
So far... - IMG 0653
- 129 2972
- IMG 0667
- 125 2552
- 154 5458
- 154 5465
- 125 2558
- 133 3331
The body/canopy This will be it's ultimate shape. - 136 3616
- 154 5423
- 136 3614
- IMG 0659
- 154 5403
- 136 3619
- 137 3751
Camera mount Allows me to bolt a camera, or other things, to the side of the Helicopter - IMG 0650
- IMG 0661
- IMG 0647
- 115 1505
- 129 2969
- 137 3756
Front view - 136 3611
- 125 2588
- IMG 0664
- 154 5457
- kt ruth wed 0021
- 132 3282
The engine The slot-shaped hole you can see is where the exhaust (muffler) pipe will attach, when it arrives. - 115 1509
- 154 5460
- 129 2947
- 123 2322
- 129 2962
- 104 0421
- IMG 0674
- 119 1955
- 119 1958
- 106 0640
- 104 0420
- 154 5420
- 129 2970
- 100 0034
Merlin [4/5] - 129 2935
- 125 2548
- 125 2568
- 129 2938
- 126 2612
- 125 2557
- 126 2609
- IMG 0660
- 136 3617
- 154 5464
- 129 2950
- 125 2572
- 119 1957
- IMG 0669
- 123 2336
- 100 0035
Merlin [5/5] - 125 2556
- 136 3613
- 154 5436
- 129 2905
- 129 2998
- 125 2584 2
- 119 1968
- 125 2512
- 129 2951
- 133 3341
Outdoors [2/4] - 129 2957
- 125 2571
- 123 2323
- 132 3277
Engine, closeup - 154 5435
- 154 5438
- 125 2588 2
- 125 2536
- 125 2560
- 100 0032
Merlin [2/5] - kt ruth wed 0022
- 129 2909
- 122 2295
- 129 2967
- 126 2608
- 154 5445
- 129 2955
- 126 2626
- 134 3463
Rear rotor servo Moved the servo from the front of the chassis to the tail boom to shorten the control rod - less chance of flexing - 126 2680
- 133 3336
Busy busy There's a lot going on with this machine. - 126 2642
- 100 0030
Glenn and Tara and Wine - 154 5446
- 133 3329
Rotor hub It's really busy up here - I can't imagine this thing spinning as fast as it will need to. - kt ruth wed 0023
- 106 0688
- 125 2549
- 100 0028
Glenn in workshop [2/2] - DSC01318
The village to be 2003-03-29 A lady waits in front of a cottage in what is to become the village. 2003-03-29 - 133 3306
Digital servo The Gyro came with this servo. Because the tail rotor pitch is being computer controlled, and you want it to react fast, you have to use a fast servo. Better yet, you use a digital servo, which mostly means the servo PWM's the motor inside much much faster. This is a reasonably speedy digital servo. When it's going, it whines a bit, but I am pretty sure that's normal. - 125 2559
- 129 2945
- IMG 0648
- 154 5444
- 154 5407
- 142 4247
- 129 2961
- 125 2566
- IMG 0671
- 154 5463
- 154 5421
- 129 2940
- 126 2625
- 125 2573
- 129 2907
- 100 1538
- 126 2677
- 125 2523
- 123 2335
- 142 4258
- 126 2674
- 154 5453
- 129 2939
- 126 2681
- 123 2333
- 123 2326
- 100 0031
Merlin [1/5] - 154 5408
- 142 4234
- 125 2584
- 154 5461
- 154 5441
- kt ruth wed 0014
- 136 3612
- 100 0038
Tara! - 100 0024
Glenns truck [2/3] - 126 2654
- kt ruth wed 0024
- 154 5406
- 100 0029
Glenn and Tara - 125 2589 2
- 125 2520
- 125 2579
- 125 2575
- 154 5419
- 129 2912
- 126 2615
- 132 3278
Engine, other side - 125 2533
- 100 0021
Blueberry tree - 126 2614
- IMG 0655
- 126 2675
- 129 2952
- kt ruth wed 0016
- IMG 0656
- 100 1534
- 123 2324
- 129 2980
- 125 2535
- 154 5442
- 133 3328
The exhaust It's shiny now. I'm sure that will change. The silicone pipe runninf from it is a fuel tank pressurisation aid. There's no fuel pump - a certain amount of exhaust gas is used to push the fuel into the carb of the engine. Quite neat, really. - 100 1533
- 127 2740
- 125 2550
- 133 3339
I fired it up... So, I took it outside, just to fire up the engine. Nobody else around to take pictures, so this is after the event. They definately make good lawn mowers - notice all the grass and grass stains. I'm so far away from flying this thing (still practising on the simulator) but I thought it would be good to give the engine and mechanics some exercise before it does fly. These things are not quiet! - 122 2230
- 129 2958
- 125 2577
- 125 2511
- 129 2928
- IMG 0663
- IMG 0657
- 154 5418
- 100 1536
- kt ruth wed 0076
- 129 2982
- IMG 0662
- 125 2594
- kt ruth wed 0020
- 154 5455
- 125 2595
- 900 0017
Merlin [6/6] - 123 2334
- 100 1535
- 100 1512
- 125 2581
- dsc sp5 0002
Canon EOS 10D - 129 2975
- 128 2849
- 122 2294
- IMG 0658
- 125 2534
- kt ruth wed 0025
- 154 5416
- 154 5437
- 100 1511
- 126 2639
- 125 2513
- 134 3464
Rear rotor servo cabling - 123 2332
- 132 3276
The engine OS 32 helicopter engine. Here it is with the Raptor cooling fan attached, basically a centrifugal fan. - 129 2944
- 126 2679
- 125 2597
- 129 2979
- 129 2956
- 126 2676
- 129 2906
- 100 1539
- 126 2628
- 133 3337
Wires/servos Much cabling. Notice how I had to trim some of the servo "horns" - they interfered with the ball-link attachments. - 100 0026
Glenn inside a truck - 134 3418
- 129 2934
- 100 1514
- 100 0023
Glenns truck [1/3] - 142 4246
- 129 2908
- 100 0020
And some more foliage - 133 3327
It's looking a bit big Note we have an exhaust (muffler) now also. - 129 2911
- 125 2521
- 129 2960
- 125 2596
- 154 5402
- 142 4249
- 128 2865
- 125 2510
- 129 2913
- 100 1513
- 122 2293
- IMG 0646
- 100 1540
- 133 3338
The radio I decided to start small. A 6-channel JR transmitter. It came with the servos and a 7-channel receiver. - 125 2593
- 125 2514
- 123 2327
- 126 2653
- 125 2590
- 154 5456
- 125 2582
- 127 2736
- 153 5325
- 142 4231
- 133 3335
The electronics arrived All the servos are on, the receiver is mounted and hooked up. - 126 2627
- 126 2623
- 104 0422
- 153 5317
Broadway - 129 2954
- 125 2589
- 126 2640
- kt ruth wed 0015
- 142 4233
- 128 2839
- kt ruth wed 0018
- 133 3325
- 125 2529
- 104 0423
- 129 2983
- 123 2331
- 126 2641
- 153 5315
Rawson/Exeter - 100 0027
Glenn in workshop [1/2] - 154 5454
- 900 0018
Tara Okay, I'm bored now... - 127 2735
- 126 2678
- 154 5417
- 128 2864
- kt ruth wed 0075
- 154 5401
- 100 1537
- 128 2895
- 128 2848
- 125 2576
- 128 2838
- 100 0019
Some other plant - 129 2981
- 154 5452
- 126 2693
- kt ruth wed 0074
- 153 5318
Lockeland Ave. - 130 3009
- 129 2992
- 100 1510
- 107 0739
- 129 2959
- 126 2607
- 132 3273
Getting started When I remembered I wanted to take pictures of the construction, this is far as I was already. - 127 2737
- 125 2574
- 123 2325
- kt ruth wed 0017
- 129 2910
- kt ruth wed 0019
- 129 2994
- 129 2993
- 128 2894
- 127 2738
- 122 2296
- 100 0016
Brumbrum - 129 2914
- 125 2578
- 100 0022
Back porch - 125 2530
- 126 2643
- 126 2624
- 125 2580
- 125 2565
- 154 5415
- 154 5409
- dsc sp5 0003
Canon EOS 10D - 128 2861
- 126 2655
- 125 2583
- 125 2551
- 107 0742
- 106 0648
- 133 3332
Rear view - 100 1531
- 126 2664
- 100 0025
Glenns truck [3/3] - 154 5440
- 147 4776
- 147 4775
- b0013
Wasp [1/2] - 129 2996
- 129 2933
- 133 3342
Outdoors [3/4] - 128 2863
- 128 2837
- kt ruth wed 0013
- 126 2631
- 125 2564
- b0017
Tigger [2/2] - 900 0022
Tara ...I'm outta here. - 142 4245
- 125 2563
- 125 2526
- 106 0652
- 153 5330
Park Ave. (I think) - 133 3316
- 115 1508
- 134 3412
- 132 3274
Side view - 126 2644
- 119 1969
- 900 0019
Tara ...yes, I know you have a new toy... - 106 0649
- 130 3010
- 142 4225
- 126 2606
- 142 4232
- 128 2890
- 133 3308
- 129 2976
- 126 2638
- 126 2629
- 107 0741
- 125 2592
- 100 1515
- 126 2692
- 126 2656
- 100 0017
Brumbrum - 129 2977
- 107 0745
- 154 5448
- 100 1530
- 126 2698
- 142 4238
- 128 2889
- 128 2847
- 126 2697
- 128 2840
- dsc sp5 0004
Canon EOS 10D - 129 2941
- 123 2319
- 126 2673
- 125 2562
- 125 2561
- 129 2943
- 125 2531
- DSC01248
- 126 2619
- 123 2337
- 122 2292
- 107 0743
- 153 5331
Park Ave. (For sure) - 153 5328
- 153 5334
Rublee St. (narrow pic) - 153 5324
Gloucester St. - 126 2630
- 122 2291
- kt ruth wed 0001
- 100 1516
- 125 2600
- 153 5327
- kt ruth wed 0012
- 106 0687
- 129 2995
- 123 2318
- 134 3419
- 125 2599
- 133 3326
Progress! With the main rotor blades on, it's starting to look like a helicopter now. - kt ruth wed 0063
- kt ruth wed 0077
- 115 1507
- 128 2814
- kt ruth wed 0066
- 129 2923
- 100 0041
Merlin - DSC01325
Depot #1 2003-03-29 A view of the depot. 2003-03-29 - 153 5360
Capitol Theatre Not decorated! - 100 1543
- 125 2598
- 100 1487
- 107 0744
- 125 2524
- kt ruth wed 0052
- 128 2815
- 153 5329
Iroquois - 132 3275
The swash plate This little device is freaky. In a nutshell, the pitch of the blades varies through their rotation, according to the motions of the aileron/elevator servos (called cyclic on a helicopter) and the collective pitch. It's all a bit mad and I onyl slightly understand it so far. - 129 2984
- 100 1532
- 134 3462
In flying shape - 129 2997
- 126 2694
- 128 2846
- 125 2525
- 106 0654
- 106 0639
- 125 2522
- cDSC01205
Man waiting at platform 2003-01-25 Man waits at platform while a train passes on the opposite tracks. 2003-01-25 - 126 2635
- 123 2321
- 153 5332
Sylvia Ave. - 130 3070
- 126 2645
- 100 1541
- 128 2866
- 107 0740
- 129 2942
- 128 2867
- 126 2601
- kt ruth wed 0026
- 126 2665
- 107 0738
- dsc sp5 0001
Canon EOS 10D - 133 3315
- 123 2312
- kt ruth wed 0003
- 100 0039
More Tara! - 128 2850
- 126 2690
- 141 4132
- 128 2871
- 126 2687
- 123 2328
- kt ruth wed 0100
- 128 2845
- 106 0680
- 126 2683
- 130 3003
- 126 2696
- 142 4241
- 900 0020
Tara ...enough already. - 128 2816
- 107 0703
- 127 2744
- 142 4248
- 140 4007
- 126 2637
- 126 2689
- 126 2657
- 123 2320
- 106 0663
- 154 5449
- 121 2185
- b0014
Wasp [2/2] - 130 3008
- 128 2859
- 128 2836
- 123 2311
- 150 5072
- 130 3047
- 126 2695
- 154 5411
- 142 4259
- 126 2617
- kt ruth wed 0067
- 129 2953
- 154 5451
- 154 5414
- 128 2870
- 128 2841
- 127 2739
- 126 2688
- 125 2527
- 115 1506
- 107 0748
- 100 0040
Merlin - 100 0018
Blueberry tree - 900 0024
Random shot - 126 2691
- 123 2317
- 107 0737
- 106 0638
- 129 2991
- 154 5447
- 153 5338
- 128 2855
- 126 2632
- 106 0650
- 100 1482
- 126 2620
- 128 2842
- 107 0746
- 130 3007
- 106 0678
- 128 2860
- 129 2978
- 128 2831
- kt ruth wed 0069
- 129 2922
- 128 2869
- 106 0681
- 126 2663
- 100 1542
- 126 2686
- 104 0429
- 142 4229
- 130 3073
- 127 2743
- 122 2204
- 114 1497
- 147 4725
- 142 4235
- 140 4097
- 100 0015
Cherry tree - 122 2298
- 100 0012
Our house... - DSC01330
The village to be 2003-03-29 Where am I? In the village. 2003-03-29 - 100 1528
- 123 2330
- 123 2329
- 142 4240
- 125 2591
- 131 3137
- 128 2813
- 106 0664
- kt ruth wed 0064
- 147 4777
- 128 2873
- 128 2872
- 107 0714
- 153 5342
Mass Ave. - 127 2741
- 107 0708
- 107 0701
- 154 5410
- 130 3006
- 129 2925
- kt ruth wed 0073
- 105 0507
- 126 2652
- 147 4738
- 127 2762
- 107 0709
- DSC01211
- 105 0508
- 100 0014
More house - 147 4752
- 133 3343
Outdoors [4/4] - 128 2892
- 126 2621
- 122 2228
- 128 2851
- 106 0657
- 133 3323
- 130 3071
- kt ruth wed 0102
- 142 4244
- 100 1524
- kt ruth wed 0072
- 106 0633
- b0016
Tigger [1/2] - 130 3072
- 127 2761
- 108 0843
- 153 5362
Milton/Herbert, I think - 106 0659
- 126 2670
- 125 2528
- 122 2223
- 107 0706
- 107 0702
- 125 2590 2
- kt ruth wed 0203
- kt ruth wed 0103
- 147 4771
- 130 3074
- 130 3022
- 130 3004
- 100 1526
- 126 2671
- 126 2658
- 126 2602
- b0012
Tulips - 130 3081
- 130 3011
- 123 2313
- 154 5450
- 126 2622
- 153 5361
Milton, I think - 128 2893
- 128 2852
- kt ruth wed 0068
- kt ruth wed 0002
- 147 4724
- 123 2314
- kt ruth wed 0099
- b0011
Pansies [2/2] - 153 5369
Park St? - 153 5366
Granton Park - 133 3333
Size comparison The universal measuring device: A Coke can. - 128 2888
- 128 2804
- 153 5341
Mass Ave./Mystic/Jefferson Cutter House - 129 2985
- 126 2669
- 106 0699
- 106 0662
- cDSC01204
Signal hut and environs 2003-01-25 Signal hut and it's neighbourhood. 2003-01-25 - 130 3018
- 100 1474
- kt ruth wed 0031
- IMG 0645
- 130 3002
- 128 2900
- 128 2898
- 123 2316
- kt ruth wed 0065
- DSC01210
- 130 3012
- 100 1523
- kt ruth wed 0050
- b0019
Bird in a tree [1/2] Can you spot the bird? - 133 3334
Size comparison - 128 2856
- 100 1484
- kt ruth wed 0032
- 107 0747
- 100 0013
...in the middle of our street - kt ruth wed 0071
- 128 2899
- 126 2662
- 125 2532
- DSC01216
- 134 3420
- 128 2830
- kt ruth wed 0091
- 106 0682
- 100 1522
- kt ruth wed 0097
- kt ruth wed 0078
- 113 1360
- 106 0698
- 100 1529
- 128 2812
- 147 4790
- 126 2618
- 122 2297
- 122 2206
- 153 5370
Warren St. - 107 0715
- 129 2932
- 126 2605
- 128 2891
- kt ruth wed 0101
- 106 0651
- 128 2817
- 121 2186
- 142 4237
- kt ruth wed 0312
- 153 5367
Decatur/N Union - 150 5071
- kt ruth wed 0090
- 107 0736
- 147 4757
- 100 1527
- 127 2742
- 126 2633
- 106 0658
- 122 2300
- 106 0676
- 130 3051
- 127 2710
- 126 2699
- 121 2184
- kt ruth wed 0004
- 106 0695
- 148 4803
- 132 3266
- 130 3021
- 107 0755
- 140 4031
- 130 3083
- 126 2666
- 106 0675
- 121 2178
- kt ruth wed 0054
- 107 0707
- 107 0722
- 140 4033 crop
- 133 3317
- 128 2853
- 107 0710
- 130 3049
- 130 3013
- 126 2659
- 130 3005
- 121 2187
- 130 3019
- 123 2301
- 127 2760
- 127 2709
- 122 2299
- kt ruth wed 0051
- 107 0712
- 106 0665
- 105 0506
- 147 4786
- kt ruth wed 0053
- 134 3421
- 123 2310
- 114 1498
- 153 5343
Mass Ave. - 100 1483
- 127 2702
- 129 2924
- 128 2829
- 100 1517
- 133 3324
- 131 3138
- 130 3082
- 130 3023
- 100 1502
- 126 2684
- 123 2338
- 130 3077
- 129 2915
- kt ruth wed 0202
- 107 0735
- 128 2832
- 100 1509
- 142 4257
- 140 4094
- 131 3198
- 100 1546
- 128 2833
- 126 2634
- 122 2290
- 147 4782
- 130 3080
- 127 2745
- 126 2685
- 107 0704
- 106 0667
- 153 5346
Across Spy Pond - 129 2930
- 147 4737
- kt ruth wed 0005
- 147 4739
- 128 2802
- kt ruth wed 0062
- kt ruth wed 0033
- 130 3041
- 100 1544
- 128 2803
- 100 1479
- 126 2700
- 126 2672
- 147 4797
- 133 3309