132 3259
132 3260
132 3261
132 3262
132 3266
132 3267
132 3268
132 3269
132 3270
132 3271
132 3272
132 3273
Getting started When I remembered I wanted to take pictures of the construction, this is far as I was already.
132 3274
Side view
132 3275
The swash plate This little device is freaky. In a nutshell, the pitch of the blades varies through their rotation, according to the motions of the aileron/elevator servos (called cyclic on a helicopter) and the collective pitch. It's all a bit mad and I onyl slightly understand it so far.
132 3276
The engine OS 32 helicopter engine. Here it is with the Raptor cooling fan attached, basically a centrifugal fan.
132 3277
Engine, closeup
132 3278
Engine, other side
132 3279
Engine in the frame
132 3280
Engine in the frame, closeup
132 3281
Engine in the frame, other side
132 3282
The engine The slot-shaped hole you can see is where the exhaust (muffler) pipe will attach, when it arrives.
132 3283
Assembling the rotor head These bits will eventually sit atop the swash plate.
132 3285
Rotor head bearings At this point, I only assembled one end of this piece. The bearing set in the bag fit onto the shaft with a collection of washers, spacers, bolts, loctite and so on. It's all a bit busy. Particularly sicne I forgot to put in a supporting piece rigth in the centre to had to disassemble the thing.
132 3286
Look at the mess!
132 3287
Rotor head and flybar The fly bar, I think, ,ostly balances the main blades. They are on a single bar whose pitch alters with the cyclic, but not the collective (I think, lots of "I think"'s here!). The bar is supposed to be near-perfectly balanced otherwise it causes really nasty vibrations in the rest of the machine. Rememeber, this thing is a huge spinning top, really.
132 3288
Flybar again
132 3290
Tail rotor assembly This was a fiddly piece to put together.
132 3291
Tail rotor assembly The red coloured pulley is a two-piece item, a flange fits on one end, and it can go two ways round. The correct way si with the shorter end into the pulley, longer end outwards. Otherwise, as I discovered, there is about 2 to 3mm play in the tail rotor shaft. Not good.
132 3292
Coming together nicely now Tail piece is in, various tail-plane bits and bobs. The tail rotor blades are on the wrong way round here (and remained so for a while) until I realised I had the belt on the wrong way. I noticied this long before firing up the engine, thankfully.
132 3294
Tail rotor The orange material you can see through the hole is the belt. The blades twist together, in opposite directions. This is how you point the helicopter.
132 3295
Main drive wheel The belt goes back to the tail rotor. The grey spindle meshes with a drive wheel on the engine drive shaft. There is a shaft going up through these two wheels directly to the rotor hub.
133 3303
Beastie so far
133 3304
Clutch The silver drum in the centre of the picture is the clutch bell. Inside this is a clutch disc, which runs directly from the engine below it. It's designed to be fully diengaged below about 7000rpm and fully engaged above 10000rpm. The rotor blades operate at a fraction of this speed, not normalyl going faster than about 1700 rpm.
133 3305
Gyro This is described by many as the "most cost effective" stabilisation gyro on the market at present. It's job: keep the machine pointing in the direction you want it to. In the old days, you would program a "revolution mix" into your radio which altered the tail rotor blade pitch according to what you were doing with the throttle/collective, the idea being that you could match the rotational energy being put out by the main rotors to make the tail rotor counteract it, and keep the machine steady. Technology these days simply measures the rotation and does what it needs to counteract it. Funky. This is what makes the difference between whirly-top-with-dangerous-bits and simply "dangerous".
133 3306
Digital servo The Gyro came with this servo. Because the tail rotor pitch is being computer controlled, and you want it to react fast, you have to use a fast servo. Better yet, you use a digital servo, which mostly means the servo PWM's the motor inside much much faster. This is a reasonably speedy digital servo. When it's going, it whines a bit, but I am pretty sure that's normal.
133 3308
133 3309
133 3310
133 3311
133 3312
133 3313
133 3314
133 3315
133 3316
133 3317
133 3318
133 3319
133 3320
133 3321
133 3322
133 3323
133 3324
133 3325
133 3326
Progress! With the main rotor blades on, it's starting to look like a helicopter now.
133 3327
It's looking a bit big Note we have an exhaust (muffler) now also.
133 3328
The exhaust It's shiny now. I'm sure that will change. The silicone pipe runninf from it is a fuel tank pressurisation aid. There's no fuel pump - a certain amount of exhaust gas is used to push the fuel into the carb of the engine. Quite neat, really.
133 3329
Rotor hub It's really busy up here - I can't imagine this thing spinning as fast as it will need to.
133 3330
So far...
133 3331
The body/canopy This will be it's ultimate shape.
133 3332
Rear view
133 3333
Size comparison The universal measuring device: A Coke can.
133 3334
Size comparison
133 3335
The electronics arrived All the servos are on, the receiver is mounted and hooked up.
133 3336
Busy busy There's a lot going on with this machine.
133 3337
Wires/servos Much cabling. Notice how I had to trim some of the servo "horns" - they interfered with the ball-link attachments.
133 3338
The radio I decided to start small. A 6-channel JR transmitter. It came with the servos and a 7-channel receiver.
133 3339
I fired it up... So, I took it outside, just to fire up the engine. Nobody else around to take pictures, so this is after the event. They definately make good lawn mowers - notice all the grass and grass stains. I'm so far away from flying this thing (still practising on the simulator) but I thought it would be good to give the engine and mechanics some exercise before it does fly. These things are not quiet!
133 3340
Outdoors [1/4]
133 3341
Outdoors [2/4]
133 3342
Outdoors [3/4]
133 3343
Outdoors [4/4]
133 3354
133 3357
133 3358
133 3359
133 3360
133 3361
133 3362
133 3363
133 3364
133 3365
133 3366
133 3367
133 3368
134 3412
134 3418
134 3419
134 3420
134 3421
134 3422
134 3424
134 3427
134 3462
In flying shape
134 3463
Rear rotor servo Moved the servo from the front of the chassis to the tail boom to shorten the control rod - less chance of flexing
134 3464
Rear rotor servo cabling
135 3599 drive blind
136 3603
136 3607
136 3608
136 3609
136 3610
136 3611
136 3612
136 3613
136 3614
136 3615
136 3616
136 3617
136 3618
136 3619
136 3620
136 3621
136 3622
136 3623
136 3637
136 3638
136 3639
136 3640
136 3641
136 3642
136 3643
136 3644
136 3645
136 3646
136 3647
136 3648
136 3649
136 3650
136 3651
136 3652
136 3653
136 3654
136 3655
136 3656
136 3657
136 3658
136 3659
136 3660
136 3661
136 3662
136 3663
136 3664
136 3665
136 3666
136 3667
136 3668
136 3669
136 3670
136 3671
136 3672
136 3673
136 3674
136 3675
136 3676
136 3677
136 3678
136 3679
136 3680
136 3681
136 3682
136 3683
136 3684
136 3685
136 3686
136 3687
136 3688
136 3689
136 3690
136 3691
136 3692
136 3693
136 3694
136 3695
136 3696
136 3697
136 3698
136 3699
136 3700
137 3701
137 3702
137 3703
137 3704
137 3705
137 3706
137 3707
137 3708
137 3709
137 3710
137 3711
137 3712
137 3713
137 3714
137 3715
137 3716
137 3717
137 3718
137 3719
137 3720
137 3721
137 3722
137 3723
137 3724
137 3725
137 3726
137 3727
137 3728
137 3729
137 3730
137 3731
137 3732
137 3733
137 3734
137 3735
137 3736
137 3737
137 3738
137 3739
137 3740
137 3741
137 3742
137 3743
137 3745
137 3746
137 3747
137 3749
Fuel line arrangement This t-piece arrangement allows me to load/unload fuel to the tank without pulling the pipwork away from the engine. Just use the right fuel line clip to direct the flow to/from the tank. Similarly, the left clip allows me to inject after run oil without having to do fiddly stuff, or remove the engine.
137 3751
Camera mount Allows me to bolt a camera, or other things, to the side of the Helicopter
137 3753
Still in one piece Front view, it's been out flying a couple of times now
137 3756
Front view
140 4002
140 4005
140 4006
140 4007
140 4013
140 4014
140 4015
140 4016
140 4021
140 4022
140 4029
140 4030
140 4031
140 4032
140 4033
140 4033 crop
140 4043
140 4044
140 4045
140 4046
140 4055
140 4056
140 4057
140 4064
140 4065
140 4066
140 4067
140 4068
140 4069
140 4070
140 4071
140 4072
140 4073
140 4074
140 4075
140 4076
140 4077
140 4078
140 4079
140 4080
140 4081
140 4082
140 4083
140 4084
140 4085
140 4086
140 4087
140 4088
140 4089
140 4090
140 4091
140 4092
140 4093
140 4094
140 4095
140 4096
140 4097
140 4098
140 4099
140 4100
141 4101
141 4102
141 4103
141 4104
141 4105
141 4106
141 4107
141 4108
141 4109
141 4110
141 4111
141 4112
141 4113
141 4114
141 4115
141 4116
141 4117
141 4118
141 4119
141 4120
141 4121
141 4122
141 4123
141 4124
141 4125
141 4126
141 4127
141 4128
141 4129
141 4130
141 4131
141 4132
141 4133
141 4134
141 4135
141 4136
141 4137
141 4138
141 4139
141 4140
141 4141
141 4142
141 4143
141 4144
141 4145
141 4146
141 4147
141 4148
141 4149
141 4150
141 4151
141 4152
141 4153
141 4154
141 4155
141 4156
141 4157
141 4158
141 4159
141 4160
141 4161
141 4162
141 4163
141 4164
141 4165
141 4166
141 4167
141 4168
141 4169
141 4170
141 4171
141 4172
141 4173
141 4174
141 4175
141 4176
141 4177
141 4178
141 4179
141 4180
141 4181
141 4182
141 4183
141 4184
141 4185
141 4186
141 4187
141 4188
141 4189
141 4190
141 4191
141 4192
141 4193
141 4194
141 4195
141 4196
141 4197
141 4199
141 4200
142 4201
142 4202
142 4203
142 4204
142 4205
142 4206
142 4207
142 4208
142 4209
142 4210
142 4211
142 4212
142 4213
142 4214
142 4215
142 4216
142 4217
142 4218
142 4219
142 4220
142 4221
142 4222
142 4223
142 4224
142 4225
142 4226
142 4227
142 4228
142 4229
142 4230
142 4231
142 4232
142 4233
142 4234
142 4235
142 4236
142 4237
142 4238
142 4239
142 4240
142 4241
142 4242
142 4243
142 4244
142 4245
142 4246
142 4247
142 4248
142 4249
142 4250
142 4251
142 4252
142 4253
142 4254
142 4255
142 4256
142 4257
142 4258
142 4259
142 4260
142 4261
142 4262
142 4263
142 4264
142 4265
142 4266
142 4267
142 4268
142 4269
142 4270
142 4271
142 4272
142 4273
142 4274
142 4275
142 4276
142 4277
142 4278
142 4279
142 4280
142 4281
142 4282
142 4283
142 4284
142 4285
142 4286
142 4287
142 4290
142 4291
142 4292
142 4293
142 4294
142 4295
142 4296
142 4297
142 4298
142 4299
142 4300
143 4301
143 4302
143 4303
143 4304
143 4305
143 4306
143 4307
143 4308
143 4309
143 4310
143 4311
143 4312
143 4313
143 4314
143 4315
143 4316
143 4317
143 4318
143 4319
143 4320
143 4321
143 4322
143 4323
143 4324
143 4325
143 4326
143 4327
143 4328
143 4329
143 4330
143 4331
143 4332
143 4333
143 4334
143 4335
143 4336
143 4337
143 4338
143 4339
143 4340
143 4341
143 4342
143 4343
143 4344
143 4345
143 4346
143 4347
143 4348
143 4349
143 4350
143 4351
143 4352
143 4353
143 4354
143 4355
143 4356
143 4357
143 4358
143 4359
143 4360
143 4361
143 4362
143 4363
143 4364
143 4365
143 4366
143 4367
143 4368
143 4369
143 4370
143 4371
143 4372
143 4373
143 4374
143 4375
143 4376
143 4377
143 4378
143 4379
143 4380
143 4381
143 4382
143 4383
143 4384
143 4385
143 4386
143 4387
143 4388
143 4389
143 4390
143 4391
143 4392
143 4393
143 4394
143 4395
143 4396
143 4397
143 4398
143 4399
143 4400
143 4400 norecomp
144 4401 RJ
144 4402 RJ
144 4403 RJ
144 4404 RJ
144 4405 RJ
144 4406 RJ
144 4407 RJ
144 4408 RJ
144 4409 RJ
144 4410 RJ
144 4411 RJ
144 4412 RJ
144 4413 RJ
144 4414 RJ
144 4415 RJ
144 4416 RJ
144 4417 RJ
144 4418 RJ
144 4419 RJ
144 4420 RJ
144 4421 RJ
144 4422 RJ
144 4423 RJ
144 4424 RJ
144 4425 RJ
144 4426 RJ
144 4427 RJ
144 4428 RJ
144 4429 RJ
144 4430 RJ
144 4431 RJ
144 4432 RJ
144 4433 RJ
144 4434 RJ
144 4435 RJ
144 4436 RJ
144 4437 RJ
144 4438 RJ
144 4439 RJ
144 4440 RJ
144 4441 RJ
144 4442 RJ
144 4443 RJ
144 4444 RJ
144 4445 RJ
144 4446 RJ
144 4447 RJ
144 4448 RJ
144 4449 RJ
144 4450 RJ
144 4451 RJ
144 4452 RJ
144 4453 RJ
144 4454 RJ
144 4455 RJ
144 4456 RJ
144 4457 RJ
144 4458 RJ
144 4459 RJ
144 4460 RJ
144 4461 RJ
144 4462 RJ
144 4463 RJ
144 4464 RJ
144 4465 RJ
144 4466 RJ
144 4467 RJ
144 4468 RJ
144 4469 RJ
144 4470 RJ
144 4471 RJ
144 4472 RJ
144 4473 RJ
144 4474 RJ
144 4475 RJ
144 4476 RJ
144 4477 RJ
144 4478 RJ
144 4479 RJ
144 4480 RJ
144 4481 RJ
144 4482 RJ
144 4483 RJ
144 4484 RJ
144 4485 RJ
144 4486 RJ
144 4487 RJ
144 4488 RJ
144 4489 RJ
144 4490 RJ
144 4491 RJ
144 4492 RJ
144 4493 RJ
144 4494 RJ
144 4495 RJ
144 4496 RJ
144 4497 RJ
144 4498 RJ
144 4499 RJ
144 4500 RJ
145 4501 RJ
145 4502 RJ
145 4503 RJ
145 4504 RJ
145 4505 RJ
145 4506 RJ
145 4507 RJ
145 4508 RJ
145 4509 RJ
145 4510 RJ
145 4511 RJ
145 4512 RJ
145 4513 RJ
145 4514 RJ
145 4515 RJ
145 4516 RJ
145 4517 RJ
145 4518 RJ
145 4519 RJ
145 4520 RJ
145 4521 RJ
145 4522 RJ
145 4523 RJ
145 4524 RJ
145 4525 RJ
145 4526 RJ
145 4527 RJ
145 4528 RJ
145 4529 RJ
145 4530 RJ
145 4531 RJ
145 4532 RJ
145 4533 RJ
145 4534 RJ
145 4535 RJ
145 4536 RJ
145 4537 RJ
145 4538 RJ
145 4539 RJ
145 4540 RJ
145 4541 RJ
145 4542 RJ
145 4543 RJ
145 4544 RJ
145 4544 RJ norecomp
147 4724
147 4725
147 4726
147 4727
147 4728
147 4729
147 4730
147 4731
147 4732
147 4733
147 4734
147 4735
147 4736
147 4737
147 4738
147 4739
147 4740
147 4741
147 4742
147 4743
147 4744
147 4745
147 4746
147 4747
147 4748
147 4749
147 4750
147 4751
147 4752
147 4753
147 4754
147 4755
147 4756
147 4757
147 4758
147 4759
147 4760
147 4761
147 4762
147 4763
147 4764
147 4768
147 4769
147 4770
147 4771
147 4773
147 4774
147 4775
147 4776
147 4777
147 4779
147 4780
147 4781
147 4782
147 4783
147 4784
147 4785
147 4786
147 4787
147 4789
147 4790
147 4791
147 4792
147 4793
147 4796
147 4797
147 4798
147 4799
147 4800
148 4801
148 4802
148 4803
148 4837
148 4839
148 4840
148 4847
148 4848
148 4849
148 4853
148 4878
150 5013
150 5014
150 5015
150 5016
150 5017
150 5018
150 5019
150 5020
150 5021
150 5022
150 5023
150 5024
150 5025
150 5028
150 5029
150 5030
150 5032
150 5033
150 5035
150 5036
150 5038
150 5039
150 5040
150 5041
150 5042
150 5043
150 5044
150 5045
150 5046
150 5047
150 5048
150 5049
150 5050
150 5057
150 5059
150 5060
150 5061
150 5062
150 5063
150 5064
150 5065
150 5066
150 5067
150 5068
150 5069
150 5070
150 5071
150 5072
150 5077
150 5082
150 5085
150 5087
150 5088
150 5089
150 5090
150 5091
150 5092
150 5093
150 5094
150 5095
150 5096
150 5097
150 5098
150 5099
150 5100
151 5101
151 5104
151 5106
151 5107
151 5108
151 5109
151 5110
151 5111
151 5112
151 5114
151 5115
151 5116
151 5117
151 5118
151 5119
151 5120
151 5121
151 5122
151 5123
151 5124
151 5125
151 5126
151 5127
151 5128
151 5129
151 5130
151 5136
151 5137
151 5138
151 5139
151 5142
151 5147
151 5153
151 5164
151 5166
151 5171
151 5172
151 5173
151 5181
151 5182
151 5183
151 5184
151 5185
152 5204
152 5205
152 5206
152 5207
152 5208
152 5209
152 5210
152 5211
152 5212
152 5213
152 5214
152 5215
152 5223
152 5224
152 5226
152 5227
152 5229
152 5230
152 5232
152 5233
152 5234
152 5235
152 5238
152 5259
152 5260
152 5261
152 5262
152 5263
152 5264
152 5265
152 5266
152 5267
152 5268
152 5269
152 5270
152 5271
152 5272
152 5273
152 5274
152 5275
152 5276
152 5277
152 5278
152 5279
152 5280
152 5281
152 5282
152 5283
152 5284
152 5285
152 5286
152 5287
152 5288
152 5289
152 5290
152 5291
153 5315
Rawson/Exeter
153 5317
Broadway
153 5318
Lockeland Ave.
153 5324
Gloucester St.
153 5325
153 5327
153 5328
153 5329
Iroquois
153 5330
Park Ave. (I think)
153 5331
Park Ave. (For sure)
153 5332
Sylvia Ave.
153 5334
Rublee St. (narrow pic)
153 5338
153 5341
Mass Ave./Mystic/Jefferson Cutter House
153 5342
Mass Ave.
153 5343
Mass Ave.
153 5346
Across Spy Pond
153 5348
Across Spy Pond
153 5360
Capitol Theatre Not decorated!
153 5361
Milton, I think
153 5362
Milton/Herbert, I think
153 5364
Fairmont
153 5365
Fairmont
153 5366
Granton Park